Vidyut controls vidyut controls and automation
Home   |   Contact    
   
   
 
   
   
   
Power Control Centres
 
Power Control Centers  
 
Power Control Centre is used for distribution and control of various power source used in industry. Normally Power Control Centers is installed near power source hence fault level is high. It is designed to suit fault level of 50KA or 65 KA for 1 sec. Busbar system in Power Control Centers are designed to suit the fault level as well as temperature rise to 40°c above ambient. Ample space is provided for cable termination. Various protections viz short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.
  TYPE   Fixed/Draw out fully componential, dust and vermin proof
  PROTECTION CLASS   IP42 / IP 54 / IP 55 - Optional
  MOC   CRCA 10 / 12 / 14 / 16 Guage as required. Modular construction with wide choice of compartment size
  RATED VOLTAGE   600 V, 50 HZ, 3 phase, 4wire
  RATED CURRENT   Up to 6000A main busbar
  SHORT CIRCUIT LEVEL   STD 50 KA 1 sec
Optional 65 KA 1 sec
  BUSBAR SUPPORT   SMC / DMC
  BUSBAR   Aluminium / Copper, Electrolytic grade
  STANDARD   IS 8623.DT
  BUS CHAMBER   With safety barrier
  CABLE CHAMBER   Ample space for cabling with supports
  ENTRY   Top or Bottom

 
Powered By SemoSoft Copyright © 2007