Vidyut controls vidyut controls and automation
Home   |   Contact    
   
   
 
   
 
 Infrastructure  


Powder Coating

Seven tank process is used for pretreatment of sheet. After surface preparation it is coated with epoxy based powder to give thickness of 80-100 microns. It is baked in oven up to 180°c temperature for better adhesion.

Bending Machine
Make:               Arco Whitney
Capacity:        22 Ton

Time is reduced, suitable for 200 mm width and 12 mm thick Busbar and repeated operation.

Punching Machine
Make:               Arco Whitney Punch press 730*8 CC
Capacity:        30 Ton

Scrap is reduced. Suitable for punching up to 20 mm diameter hole up to 12mm thick AL/CU busbar.

Ferrule Machine
Letatwin LM-370A
Electronic lettering machine

It gives good aesthetic value to the job. Permanent marking ink is used. Variable sizes of sleeve are available. Number of letters can be accommodated in one ferrule. Aesthetically good, tube available in various sizes like 5mm, 9mm, 12mm. Printing method used is Thermal Transfer with 300 dpi.


 
Powered By SemoSoft Copyright © 2007